Aggregator

LATE ISSUE

Paul, recently, it seems that I receive print editions of RW describing meetings or conventions that have already happened by the time the issue hits my mailbox. Has it been decided that print readers won’t attend anyway, so why give them a heads up on content? It seems that the print timing is at least a month out of sync with reality, for no apparent reason, compared with the digital. It’s not clear to me why the digital and print versions aren’t more or less synchronous, with a mailing delay for the print.

Gary O. Keener
Keener Technical Services
San Antonio, Texas

Paul McLane replies: Thanks Gary. Nothing has changed in our planning of content (and no one hates more than I to see a well-researched show preview article reach readers after the event). We’ve been experiencing shipping delays that put recent issues, one issue in particular, in the hands of readers too late. We also have had some disruption around a move of our offices from northern Virginia to downtown D.C., which now is complete. I’m monitoring though to keep our online and print content in better synch. Sorry for the inconvenience. Remember too that you can access a digital version of any current issue at radioworld.com under Resources, if a print copy is running late.

 

REMOTE CONTROLS

I really enjoyed reading the article by Tom Vernon, “Remote Controls Have a History All Their Own.” It brought back fond memories of some Good Old Days when the remote control equipment mentioned was in production. I was the project engineer for all of the analog remote control apparatus listed for Moseley Associates. Nice photo of the TRC-15; that unit sold over 4,500 units while in production.

Tom managed to write an article that covered a wide field of equipment from several manufacturers and he did it very well, accurately and completely. Congrats, Tom!

Jim Tonne

The post Reader Shares Late Issue Concerns appeared first on Radio World.

Slightly more than 100 years ago, on Feb. 17, 1919, station 9XM at the University of Wisconsin in Madison broadcast human speech to the public at large.

The cover page of the book “9XM Talking” by Randall Davidson.

9XM was first experimentally licensed in 1914, began regular Morse Code transmissions in 1916, and its first music broadcast in 1917. Regularly scheduled broadcasts of voice and music began in January 1921. That station is still on the air today as WHA.

In 2019 we’re celebrating the 30th anniversary of Radio World International, but we mustn’t forget the whole story that began many years before.

TIME-LAPSE CAMERA

The first years of radio were undoubtedly flavored with a pioneering spirit, with new discoveries and technical advances. This led to more listeners and the beginning of modern broadcast radio.

About 60 years ago, radio was in nearly every home and radio engineers already had a thorough understanding radio frequency propagation and broadcast principles and tricks. So, having secured the transmission chain, attention could be shifted to indoor studio equipment.

If someone had installed a time-lapse camera in a radio studio 60 years ago, a review of all those images would display three main, well-defined periods. For the sake of simplicity, let’s consider the technical room, usually deployed at larger facilities, as part of the radio studio itself.

The first successful practical medium for music was the lacquer disc. After World War II the vinyl disc would be developed and refined into the “long-play/LP” and “45” to facilitate an explosion of music-based radio stations.

The TEAC A6600 AutoReverse, a workhorse tape recorder, provided many radio stations with hours of unattended playout.

The industry practice would distill into a two-turntable arrangement to seamlessly transition from one song to the next one while the talent on air was speaking. Adding a third turntable with disc-cutting capabilities allowed for making recordings of programs.

“Automation” first became available also for smaller stations in the shape of large reel-to-reel tape recorders, which allowed the facilities to go on-air even when no one was in the studio.

The slow rotation of tape reels, as well as their size, resembled the rotation of records on turntables. That’s right, 60 years ago radio was based on rotation.

ROTATION

This first era lasted about 30 years, up to the late 1980s. Some 30 years ago, CD players started becoming popular in radio studios. Turntables stayed there for a few years, but they were eventually blown away by CDs, which offered more reliability, a compact size and were easier to use.

Cassette changers gradually replaced reel-to-reel recorders in radio studios for unattended playout.

Reel-to-reel tape recorders suffered from the appearance of the first robotized cassette machines, which soon replaced them as backbone of “automation” systems.

By the end of the 1980s and beginning of 1990s the second period in modern radio began. The first issue of Radio World International appeared at that moment, when radio was still based on rotating devices, but the magic was becoming smaller and increasingly invisible since almost everything was bunkered behind the glowing front panel of CD players and cassette changers.

Soon after — and RWI was there to welcome that revolution — computers and digitized music reinvented both the practice and layout of radio studios.

VIRTUALIZATION

Suddenly, radio content no longer rotated. Everything became static and remote.

Radio studios still hosted the physical surfaces and PC monitors to control the whole system, but the system itself was usually installed into a separate room.

Software-based playout automation and music recommendation tools introduced a paradigm shift and dramatically changed the way radio professionals managed their stations. Digital audio formats completed the migration of radio studios to a static, software-centric model.

Just 10 years ago, a further revolution knocked at the industry’s door. Now we call this “virtualization,” but at the time the idea was just to have some software steps, each one capable of performing one of the routine tasks of a radio station’s everyday activity.

Telephone hybrids, microphone processors, mixing consoles, content players, STLs, etc., everything could run on off-the-shelf computer-based digital hardware devices, provided there was a proper network connection to the rest of the production facility and to the web.

For the first time ever, radio was able to do without single-purpose dedicated hardware, with exception of the control surfaces (since the real mixing was likely performed in the machine/server room). The next step along this path dates back to a few years ago: software developments and the availability of high-performing mobile devices, properly backed up by the ubiquitous availability of high-speed internet connection, opened the studios’ doors to virtual consoles.

Further, they allowed almost any station to set up a complete remote studio virtually everywhere. Through a single laptop PC or Mac a single person had full control of anything that could usually be done at the station’s studios or a group’s technical operations center, including airing a number of separate channels.

JUST WORKFLOW

A comprehensive virtualized approach can minimize equipment requirements. A fully featured radio station, including a visual channel and intense social media interaction, only needs a microphone, camera, headphones and a computer and a reliable internet connection.

DJ “Jivin’ Gene” spins records at the WWOZ studio in early 1980s. Photo CC Attribution-Share Alike 3.0 Unported

Radio infrastructures and studios are not just virtualized, they are now dematerialized. They still exist but they lie in a nomadic “somewhere” in the cloud.

The first 40 years of radio needed a common layout and equipment to run a radio station and a radio studio. The last 60 years have been all about evolving and transforming both that layout and equipment as well as adapting and enhancing the relevant workflow.

Today so much of traditional studio gear no longer exists in a physical shape. The effort in radio production has become a matter of “workflow.”

Yet, while hardware and software may have moved to the cloud, radio is still here. The competitive landscape of the medium has also evolved enormously. Since the ubiquitous availability of internet, a number of competing platforms have begun offering audiences new kinds of audio services.

This may scare some radio broadcasters. But one must consider that in any market segment fair competition usually enhances the quality of the end product and fosters consumer loyalty. Why shouldn’t it be the same for radio?

TALKING TO

So, what will happen to radio over the next 30 years?

In the future the concept of “audio consumption” will replace the idea of “radio listening.” The distribution mix and the fruition model of radio will probably experience a dramatic change. But we don’t have to confuse radio with its receiving device.

Radio is not just news, talent talk and music. Radio is storytelling and the ability to entertain and engage a target audience through the appropriate blend of stories, news and music.

A multitude of distribution platforms means a multitude of ways to reach our target audience. But while a customized playlist is “for” a specific listener, radio “talks to” the same listener. No matter if five- or five million people are listening, radio individually “talks to” each of them.

For many years, the sound of radio was the sound of vinyl records and turntables.

That’s the magic of radio, and that’s what radio stations have to preserve and even enhance. Using a radio station to broadcast a playlist turns that station into a music streaming service, just far more rigid than a streaming service. This is because listeners have no way to customize it.

A streaming service offering true storytelling through stories, news and music, de facto is a radio station. It’s our model with just a different distribution mix. But, again, radio refers to the content, not the distribution mix.

WHERE THINGS HAPPEN

Looking forward, the number of available stations will continue its rise with new stations targeting very specific audiences. The cost for producing content will significantly decrease, thus making it affordable to deploy many flavors of the same station, each of them targeting small or niche audience.

The overall audience numbers will probably remain similar to the present numbers, even if listening figures will be jeopardized through a much higher number of stations and channels. Future radio stations will probably be 100% virtual, with physical studio gear (if any) used for backup purposes only.

[Read: Radio World International Celebrates 30 years!]

The easiness to report from virtually everywhere, as well as to deploy a mobile studio, will move radio stations to be closer to where people meet and where things happen.

There will certainly still be RF transmitters and on-air broadcasts, as well as receivers featuring a return channel via IP to interact directly with the station. This will open new possibilities to engage the audience, offering them tailored information and content.

Overall operating cost per listener will not greatly vary in the future because the ongoing reduction in production and distribution costs will compensate for the need to produce much more content and to air more channels.

CALL FOR YOUTH

Provided radio succeeds in preserving its DNA, there is still one key item. Radio continues to lose its appeal with young listeners. Nowadays youth consumes more audio content than ever, but not radio.

This is happening in virtually every developed market, and thus far broadcasters have failed in reversing this trend.

This is most likely not because of the scarce appeal of radio content itself, but rather a matter of distribution channels and content format. Using various distribution platforms requires radio stations to properly repurpose their content to best fit each specific distribution channel. This may be the biggest challenge for radio in the future

Today’s youth are tomorrow’s listeners. According to radio listening reports per age group, their parents and relatives still listen to radio, both in car and at home. It is therefore natural that they are familiar with radio and have experienced a sort of endorsement for it.

The same thing happened to their parents, when they were young and that “imprinting” worked. The reasons why those premises are failing with today’s generation are still unclear.

Recently, the universal popularity of mobile devices across any age group drove many radio executives to trust that a well-shaped radio app could be an effective shortcut to bring radio back to the youth.

The results generally scored below expectations, probably because — once again — radio has been confused with its receiving device, while the crucial item is content.

A possible key to catching young peoples’ attention is through engaging apps and content designed and shaped in the way they want and are looking for.

 

The post The Lasting Tale Of Radio appeared first on Radio World.

.

.

.

.

.

KISS FM, the flagship radio station of Kenya’s the Radio Africa Group, recently installed a RƎLAY Virtual Radio system from Lawo in what it says was an effort to modernize.

RƎLAY is a mixing console that runs in a virtualized PC environment on a PC or laptop. It features a multitouch-enabled screen interface that can control things like voice processing and mix-minus. When paired with a third-party playout system or other third-party broadcast software, users can essentially run a broadcast studio through a single computer.

KISS FM designed its new studios around the RƎLAY virtual mixing console. All PC sources and outputs use AES67 as the Lawo A_line AoIP node translates microphones and other line-level sources to AES67. These are then available to RƎLAY via Ethernet and a network switch.

RƎLAY has features built-in audio shaping tools allowing for individual adjustment of all microphone parameters, including Lawo Automix and Autogain features.

Because RƎLAY uses standard AES67 networking, Radio Africa’s systems can be expanded to add more PCs and sources as their operational requirements change.

 

 

The post Kenya’s KISS FM Updates With Lawo RƎLAY appeared first on Radio World.

Jim Leedham is a contract engineer in Omaha, Neb., and maintains many transmitter sites. Several have Broadcast Electronics transmitters. To keep memory presets in the event of a power failure, these rigs have a 9V battery located behind the hinged control panel. As a part of his maintenance procedure, Jim replaces the batteries yearly.

Fig. 1: Forget about replacing this battery. It destroyed the battery socket.

Recently, Jim performed this maintenance task on a BE FM1C1 1kW FM transmitter. However, when he attempted to remove the battery, the battery terminal came with it, seen in Fig. 1. One of the two sockets that make up the battery terminals actually broke off, shown in Fig. 2.

Fig. 2: A close-up of the “memory keep-alive” battery terminal.

This battery is important. It keeps transmitter presets alive, should there be an AC mains power failure.

Jim was able to cobble a replacement socket until the actual part arrived from BE. But in sharing this tip with Workbench readers, he offers a couple of warnings.

First,  place a label on the front panel noting that a battery is inside. Do this as a courtesy to other engineers who may not be familiar with this equipment.

Second, if you maintain these transmitters and encounter a power failure, beware! If the battery is dead, when power is restored and you attempt to restart the transmitter you’ll get zero RF output!

Since the battery kept the memory preset, if there’s no battery voltage, there’s no preset; the power goes to zero. It’s a simple process to press the “RAISE” power pushbutton, until the appropriate power level is achieved. As engineers, however, we always seem to look for the worst. It could never be as simple as just pressing the “RAISE” power button!

Jim is right, I had this problem on a higher-power BE unit years ago, and wasted time trying to troubleshoot why I had plate volts but no plate current or RF output. Talk about feeling foolish.

So now you know. Replace those batteries. Note the date of replacement on the side of the battery with a Sharpie or other brand of marker. If you make a chart of equipment needing batteries, you can replace them all, along with your smoke and fire detectors, at the same time each year.

What’s nice about the BE product is that you can replace the battery any time, not just during a maintenance session; that front panel is not interlocked. And if your timing is such that the power fails while you’re in the process of replacing the battery, at least you know how to get the transmitter back on the air.

By the way, if that scenario happens to you, make sure you buy a lottery ticket!

 

***

 

Frank Hertel, principal of Newman-Kees RF Measurements and Engineering in Evansville, Ind., has an older computer in his shop that is loaded with a 32-bit version of Windows 7. It is using a known “valid” issue of the operating system.

Recently, while on a phone call with a fellow engineer, Frank turned this computer on and noticed it was sluggish. He traced the slow speed as being due to the computer performing an update.

Frank continued to watch the process, while the long update continued. When it finally rebooted, the computer displayed a persistent screen message stating that his computer had an “Invalid Key.” It further stated that it was operating with an “Invalid Copy.”

The computer seemed to function normally, but it now presented the persistent message “ — Invalid — ” in the lower right of the screen. At various intervals Frank’s work would be interrupted by the presentation of a large message block in the middle of the screen. Canceling the message would let you continue to use the computer. There are other things it also did to try to get Frank to buy a “New Key.”

So, Frank went online to seek a fix. He located this site that repaired the problem: https://www.itechfever.com/how-to-fix-windows-7-not-genuine-error/.

If your valid issue of Windows 7 all of a sudden is nagging that your computer has an “Invalid” issue of Windows 7, you might give one of the methods on the site a try.

 

***

 

I really enjoy finding topics that generate great reader comments. The sticky issue of removing audio tape cartridge labels turned out to be one of those topics.

Curtis Media’s Dave Dalesky wrote that a former PD showed him how to apply either oil or peanut butter to the old label so it would come off easily. Maybe so, but I also envision the hungry overnight jock licking the carts. Maybe it’s a good thing we now trust computers with our audio playout!

Send Workbench tips and high-resolution photos to johnpbisset@gmail.com.

John Bisset has spent 50 years in the broadcasting industry and is still learning. He handles western U.S. radio sales for the Telos Alliance. He holds CPBE certification with the Society of Broadcast Engineers and is a past recipient of the SBE’s Educator of the Year Award.

The post A Dead Battery Can Ruin Your Station’s Day appeared first on Radio World.

As required by the National Defense Authorization Act, the FCC Submits its Third Semi-Annual Report to Congress on Submissions by U.S.-Based Foreign Media Outlets

.

.

.

.

.

.

John Storyk

Last year, 61% of the podcast fans who responded to a survey by Discover Pods reported they spent more time listening to podcasts than watching TV. According to the company’s Podcast Trends Report 2019 that number has climbed to 66%. Also this year, 82.4% reported they listen to podcasts for more than seven hours each week.

Have you and your station or company considered podcasting as a way to reach a larger audience? How do you get a podcasting program off the ground? The Video Show, a two-day event in Washington, Dec. 4–5, 2019, will feature an entire track on the basics of podcasting.

The session “Podcast Studio Design: Necessities, Variations and Options,” presented by John Storyk, a founding partner of Walters-Storyk Design Group, is a great place to get started. He’ll discuss how the company’s expertise developed studios from the ground up for both Stitcher and Spotify’s Gimlet Media, answering the unique needs of professional podcasting.

The Video Show caught up with Storyk for just a minute ahead of the show.

The Video Show: Your presentation at The Video Show is a case study on how you designed multiple studios/production workspaces for two of the biggest names in podcasting — Stitcher and Spotify’s Gimlet Media. Is creating a facility for podcasting much different than, say, creating one for recording music?

John Storyk: Super question… in many respects, the process is identical to recording studio (content creation spaces) design. All the aspects of the process have to be addressed — programming, pre-design, schematic design development, value engineering (budget!) construction documentation, construction administration, final commissioning, etc.

Many of the acoustic issues in studio design are also the same, but some differences do exist.

1. Podcasting environments are mostly associated with the spoken word. In fact, in one respect this makes things a bit easier — limited frequency range for design considerations. However, a new issue exists when creating multiple room facilities (such as Gimlet and Stitcher). The multiple podcasting rooms need to sound virtually identical. This is not always the case in small-room design for studios (i.e. multiple vocal booths). We will discuss this in more detail at the symposium in Washington.
2. Typically, podcasting rooms are small and for some reason podcasting companies frequently do not allow quite enough space for all the rooms including well-isolated construction (thicker than average walls); door swings, ADA requirements; sound locks, etc.
3. Podcasting rooms need to be very quiet — NC 15 is our starting point — not too different than many studios, but there is little room for negotiation here.

These are just some of the issues. Always a challenge!

The Video Show: The podcasting world is rapidly changing and maturing, as evidenced, for instance, by the fact that Spotify purchased Gimlet in the middle of your project. Did your clients find their expected needs for the studios changed during the design process?

Storyk: Not sure at all how to answer this — both Gimlet and Stitcher are in new facilities that have not been operating that long. I cannot imagine any studio that, when it opens it doors, does not see something they would like to have done a different way. We have tried to future-proof both facilities. Time will tell.

The Video Show will feature more than 100 sessions on nine presentation stages, as well as a dedicated screening room, demo areas, streaming studio and dynamic exhibit floor. Want to hear more about this topic? Visit the website to learn more and register.

The post The Video Show: One Minute With John Storyk appeared first on Radio World.

The Federal Communications Commission has set deadlines for filing comments and reply comments to the Notice of Proposed Rulemaking about whether it should eliminate or revise its requirements for access to broadcast antenna sites as part of its media modernization efforts. 

The NPRM was adopted Oct. 25 and published in the Federal Register Nov. 6. Therefore, comments are due by Dec. 6 and reply comments must be filed on or before Dec. 23.

[70-Year-Old Antenna Site Rules Up for Debate by FCC]

The current rules (found in sections 73.239 and 73.635) prohibit the FCC from granting or renewing a TV or FM station license if the applicant/licensee controls an antenna site that is suitable for broadcasting in the area and does not make the site available for use by other similar licensees.

The post Commission Announces Antenna Site Comment Deadlines appeared first on Radio World.

The author is general counsel of the Society of Broadcast Engineers.

There is a lot of inaccurate or misleading information being circulated, mostly within the land mobile radio community (but elsewhere as well), about your obligation to paint and light “short towers” (i.e. those between 50 and 200 feet in height) that are not located in close proximity to an airport or heliport, but which are located in rural or agricultural areas.

Here is what broadcast engineers need to know: You may have to register your short broadcast tower in an FAA database depending on its location, but you do not have to paint or light it unless it is near an airport.

CROPDUSTERS

It all started back around 2013. States became concerned that low-flying agricultural aircraft were hitting meteorological evaluation towers (METs). There is no history of aircraft hitting short towers generally; the only problem was with respect to METs.

These are temporary structures, often erected in rural areas on short notice, with very low visibility, and they are very hard for pilots to see. They are not on any maps; and for cropdusters and other low-flying aircraft, they posed a real threat if not near other structures.

States that have rural, agricultural areas became concerned that short towers that are not near airports did not have to be lighted or painted according to FAA regulations. Colorado, Washington state, Idaho and a few other western states enacted statutes that regulated all short towers.

In the wake of agricultural aircraft collisions with METs, the National Transportation Safety Board (NTSB) recommended in 2013 that states enact laws (cropduster statutes) requiring marking and registration of METs. FAA Advisory Circular 70/7460-1L concerning Obstruction Marking and Lighting, released Oct. 8, 2016, urged, on a voluntary basis, the marking of METs (only) less than 200 feet or 61 meters in height.

The basic premise for the cropduster statutes was that short towers are not regulated by the FAA. That was inaccurate. Towers less than 200 feet in height are regulated by the FAA (and notification to the FAA is called for by the FCC) if a tower shorter than 200 feet is to be located in an area that the FAA has determined constitutes a danger to air navigation: that is, where the towers are located within the glide slope of an airport or heliport (see FCC rules, Section 17.7). The glide slope is 100-to-1 for a horizontal distance of 6.10 kilometers from the nearest point of a runway of an airport or heliport, and less for towers closer to the airport or heliport.

Unless such short radio towers were located within the glide slope of airports or heliports, they were not required to be painted or lit because they were not deemed to be an air hazard.

THE FINAL SAY

The FAA has preemptive federal jurisdiction to protect air traffic as necessary in a reasonable exercise of its discretion. The comprehensive regulation of tower height, marking and lighting by the FAA (in conjunction with the FCC) leaves no room for the states to supplement it. The Supreme Court has concluded that Congress intended to preempt states with respect to aviation safety.

Perhaps because these state cropduster laws were subject to challenge, it enacted H.R. 636, the FAA Extension, Safety and Security Act of 2016 (Reauthorization Act) in July 2016. Section 2110 of that act instructed the FAA to enact rules by July of 2017, requiring painting and lighting of short radio towers that were located in rural areas.

The 2016 act defined towers that are covered as self-standing or guy wire-supported structures: (1) 10 feet or less in diameter at the above-ground base (excluding concrete footing); (2) more than 50 and less than 200 feet tall; and (3) with accessory facilities mounted with antennas, sensors, cameras, meteorological instruments or other equipment.

Covered towers were those located (1) outside the boundaries of an incorporated city or town; (2) on undeveloped land; or (3) on land used for agricultural purposes. Undeveloped land was defined as a geographic area where the FAA determines low-flying aircraft are operated on a routine basis, such as low-flying forested areas with predominant tree cover less than 200 feet and pasture and range land.

Exceptions to the covered tower definition include: (1) structures adjacent to a house, barn, electric utility station or other building; (2) structures within the developed area of a farm immediately surrounding a house or other dwelling such as a yard; (3) structures that support electric utility transmission or distribution lines; (4) structures that are wind-powered electrical generators with a rotor blade radius exceeding six feet; or (5) street lights erected or maintained by government entities.

This was a huge problem of course. Short broadcast towers, if they had to be painted and lit, would have to be removed from most locations due to local land use regulations, and the cost of painting and lighting short towers was prohibitive for most users of them.

With help especially from Sen. James Inhof of Oklahoma (himself a pilot), the NAB, the SBE, the Association of American Railroads and others, the FAA Reauthorization Act of 2018 was enacted. It amended and clarified the 2016 act by revising the requirements for covered towers, as long as the FAA administrator determines they pose no hazard to air navigation.

The legislation requires covered tower operators or owners to either submit the tower’s location and height information into a database to be established by the FAA, or mark the tower consistent with the FAA’s 2015 advisory circular (AC 70/7460–IL). Only METs have to be painted and lit.

The FAA has not yet developed its database, which will contain only the location and height of each covered tower. Covered tower operators or owners who elect to submit tower information to the FAA database must do so within one year of the availability of the FAA database. The 2018 act also excludes towers located within the right-of-way of a rail carrier and used for railroad purposes.

This article originally appeared in the SBE Signal newsletter. Visit sbe.org.

The post Clearing the Air on Short Towers appeared first on Radio World.

The author is with WorldCast Systems.

BIELEFELD, GERMANY — ams-Radio and MediaSolutions is a radio solution provider for seven local radio stations around Bielefeld, Germany, as well as a technical support provider to 12 area radio stations. ams-Radio and MediaSolutions is one of the WorldCast Manager’s early adopters and a user since 2017.

Mario Schoemitz, IT business manager, responsible for the broadcast technology area, shared his company’s experience using the WorldCast Manager platform.

As a solutions provider for radio broadcasters, ams-Radio and MediaSolutions is entrusted to oversee, across multiple sites, FM broadcast equipment from different vendors for applications such as IP transport, media processing and FM transmission.

In 2017, the company was looking for a new, reliable, and easy-to-use monitoring solution which would provide them real-time status, alarms, and other advanced modules to optimize their workflow, maximize equipment uptime, and provide overall support in delivering the best service to their customers, at the level expected of a reputable solutions provider.

UNIFIED, END-TO-END MONITORING

The WorldCast Manager is an enterprise, end-to-end and multivendor monitoring and control software for broadcast and media. It enables users to oversee their entire ecosystem across a single unified view, to centralize data, and to streamline the management of IP-enabled gear and technology. The scalable WorldCast Manager plugs in to any third-party or in-house technology with open protocols and APIs, and functions on an open-driver policy.

Its combination of modules enables users to:

● Maximize their equipment uptime thanks to real-time alarms, notifications, time-based reporting and root cause analysis;
● Save time for operations with time management features, event resolution tracking, and advanced control for remote actions over connected equipment with industry standard protocols;
● Make intelligent decisions by aggregating data from multiple units and locations, then transforming that data into comprehensible, visual insights and reports.

ams-Radio and MediaSolutions primarily uses the WorldCast Manager for monitoring, reporting, and analyzing events for their customers. It directly informs their technicians in the case of major events, enabling fast intervention.

The WorldCast Manager has, according to Schoemitz, significantly improved his team’s workflow. Thanks to the platform’s user friendliness and range of functions, it makes it easy for everyone at the company to oversee all events at each transmitter site, across one, single view.

“We’ve recently upgraded to the newest version and we are very excited about the new modules. The best aspect for us is the analytics. We can compare all events in the timeline and see the relationships between events.”

The new reporting module is designed to save time and quickly generate updates for customers.

“I recommend the WorldCast Manager as a very powerful tool for all broadcasters; it is very easy to use and gives users all the information that they need for monitoring multiple sites,” he said.

For information, contact Tony Peterle at WorldCast Systems in Florida at 1-305-249-3110 or visit www.worldcastsystems.com.

The post WorldCast Manager Sees the Big Picture appeared first on Radio World.