Operational Status
VPIF | Suspended Operations |
EZForms | Unavailable |
Michi on YouTube
Most popular
Aggregator
Titus County, Texas Petition for Modification of the Satellite Television Markets of Stations KLTV, Tyler, Texas; KETK-TV, Jacksonville, Texas; KFXK-TV, Longview, Texas; KYTX, Nacogdoches, Texas; and KTVT, Fort Worth, Texas
Actions
Broadcast Actions
Pleadings
FCC Announces Working Group Members of the Advisory Committee on Diversity and Digital Empowerment
Broadcast Applications
Applications
The Great Outdoors for Fun and Profit
I love to hike, bike and walk, especially on trails through the woods. Judging from the quantity of people I encounter on my excursions, I am not alone in my passion for the great outdoors. It’s one of the few remaining places in America where people actually openly smile and say hello to one another. I suppose we are all in a better mood when carefree and breathing fresh air.
Radio stations are always searching for ways to project fun, tap into good feelings and show support for public institutions. By appointing one of your on-air personalities as your “outdoors person” — or hiring a freelancer — you can capture this feel-good attitude. And yes, there’s even a way to generate revenue by doing so.
A clever name or title for this al-fresco role will help you to build affection for the person presenting information on-air, online and via your social platforms. You are creating a subject matter expert — an influencer, in today’s parlance — who has the street cred to guide your audience into the great outdoors.
No doubt, part of the appeal of communing with nature is that many outside activities are either inexpensive or even free. It’s important to communicate the financial facts and other details when talking about park entry fees, activities and events.
Here’s an example of how this could play out on your station and then across your brand’s platforms:
- On-air pre-recorded piece: “Hey, it’s Smokey O, the Outdoors Guy. During this amazing spell of mild winter weather, have you considered hiking in the nearby George Washington National Forest? Parts of the forest are less than two hours from DC. One trail I particularly recommend is the Woodstock Tower Trail, a moderate 45-minute gradual climb. When you get to the top, you can climb the ranger tower where you can see for miles over the Shenandoah Valley. Entrance to the park is free. Get more details about how to plan your day at [station’s website], Facebook page or see pics at #SmokeyO.”
- Tag: “Smokey O, the Outdoors Guy, is brought to you by Smoot’s Outfitters, where all your climbing gear is now 20% off.”
- On Instagram, you’d post pics of the hike.
- Your host, Smokey O, could do a weekly five-minute podcast about his forays.
- Some of these clips could be recorded while Smoky O is actually hiking, a great way to inspire listeners to get up and go.
After you’ve established your Outdoors Person as an authentic, reliable personality and he or she has gained a following, you’re really ready to run. They can begin making appearances at nonprofit events and activities to strengthen your station’s community relations, then also serve as a personality doing live cut-ins from retail establishments and commercial exhibitions related to anything outdoors.
FINDING YOUR SMOKEY OI’ve left the most challenging part of this plan for last. You’re likely wondering how in the world you are going to find the right person for this role.
Aside from the normal job sites, like LinkedIn and Indeed, and getting recommendations from locals connected to the outdoor scene, have some fun!
Run a contest and do “tryouts” for a month. You could feature contestants on your morning show, have them guest-post photos on your Instagram, and then let your audience vote.
You could also check to see if there are any local influencers with an active lifestyle who are already big on YouTube or Instagram. Likely, they’d love to reach a new audience via radio and your social channels.
Sowegalive.com features its own “The Great Outdoors Radio Show” and a podcast for Georgia outdoor enthusiasts.Remember that this concept is not limited to hiking. Depending on your location, you can cover fishing, hunting, skiing, snowboarding, kayaking, sailing… virtually any outside activity that your audience enjoys in your area.
More than 150 years ago, Massachusetts native Henry David Thoreau wrote in his journal, “What is Nature unless there is an eventful human life passing within her?” Encourage your listeners to experience the world outside, and who knows what they may discover.
Mark Lapidus is a multi-platform media, content and marketing executive and longtime Radio World contributor. Email mark.lapidus1@gmail.com.
The post The Great Outdoors for Fun and Profit appeared first on Radio World.
Big Tech, Broadcast Battle Over 6 GHz
The FCC is getting pressure to free up the entire 1,200 megahertz of the 6 GHz band for Wi-Fi, as broadcasters wave caution flags over potential interference to their signals should a sharing regime be instituted.
A continued call for all of the spectrum that stations now use for electronic newsgathering (ENG) came in a letter to the FCC from some of the biggest in Big Tech — Apple, Facebook, Google — as well as from consumer and free-market advocacy groups.
That was followed closely by a letter from a bipartisan pair of legislators calling for the same approach, including one whose Northern California district skirts Silicon Valley.
Broadcasters use the band for broadcast auxiliary services (BAS) operations such as sporting events, breaking news and special events. They said the FCC’s proposed interference protections — limited to lower-power, indoor operations — miss the mark, particularly as some camera transmitters used to relay footage to stations also operate indoors and at low power, so they would be in the interference line of fire even with those limitations on unlicensed devices.
Broadcasters have had to fight for ENG before as the FCC trolled for spectrum. They don’t want the agency to allow full use of the band without assurances — and not simply from the computer companies or cable operators hungrily eyeing the spectrum — that new uses won’t interfere with existing operations.
Cable operators, who are looking for more Wi-Fi spectrum, agree with the computer companies that there is a way to share and share alike.
The FCC on a mission to free up as much spectrum for 5G as possible (a Trump administration priority), including allowing shared use wherever it is feasible.
While some have argued for moving incumbents to a different band entirely, Apple and others have said that process could take a decade. Besides, sharing will work without jeopardizing incumbent service, tech companies told the FCC: “If the commission wants to bring more midband spectrum into use for next-generation wireless in the near term, while preventing disruption and interference to incumbents, the clear answer is to make 6 GHz available for shared unlicensed use.”
Lawmakers Join PushIn their letter, Reps. Jerry McNerney (D-Calif.) and H. Morgan Griffith (R-Va.) asked the FCC to free up the entire band ASAP. “We believe the 6 GHz band’s greatest potential would be realized by unlocking all 1,200 MHz of the band for unlicensed use,” they wrote. “This would foster innovation and greatly benefit American consumers and our nation’s economy.”
The legislators said they agree that protecting incumbents is crucial, but also argue that Wi-Fi has a track record of successful sharing and this should be no different, given the FCC’s expertise in protecting licensed users from interference.
The FCC voted unanimously back in October 2018 to propose opening up the band to unlicensed devices — everything from laptops to Fitbits to offloading wireless traffic — using automatic frequency control (AFC) devices to prevent interference with licensed users.
All the commissioners pointed to the need to relieve congestion in the wireless band, including under the direction of Congress in the MOBILE NOW Act, which charged the FCC with finding more spectrum for 5G.
The FCC is expected soon to vote on making that proposal a reality. But not if broadcasters have anything to do with it.
The National Association of Broadcasters argues the proponents of sharing in the band “assume away” the challenges of protecting those BAS operations. The trade group told the FCC earlier this month that hundreds of MHz can be opened for Wi-Fi and broadcasters are willing to work with the government and stakeholders on a solution to sharing. But nothing the computer companies have so far come up with fills the bill.
“[T]he Wi-Fi uses under consideration in this proceeding are simply incompatible with mobile broadcast operations used for electronic newsgathering — and no proposal advanced by any party to date will protect those mobile operations,” NAB says.
If those do ever materialize, the NAB said, the FCC can consider them then, and in a separate proceeding.
The post Big Tech, Broadcast Battle Over 6 GHz appeared first on Radio World.
Introduction to the Six Basic Audio Measurements
The author is technical publications manager and a senior technical writer at Audio Precision in Beaverton, Ore.
When reduced to its basics, the process of audio test and measurement is concerned with a small number of performance benchmarks. At my company, we call these “the Big Six,” and they are as follows:
- Level
- Frequency Response
- THD+N (Total Harmonic Distortion plus Noise)
- Phase
- Crosstalk
- Signal-to-Noise Ratio (SNR)
Fig. 1 shows a typical test setup for the Big Six audio measurements.
Fig. 1: Test setup for the Big Six audio measurements of a device under test. LEVELAny Device Under Test (or DUT, as often referenced in the world of test and measurement) may have a number of level measurements that are of interest. You must choose which level you are seeking. Target levels include:
- an input level that produces a given output level, such as 1 volt, or 1 watt, or unity gain (see below for a discussion of DUT gain);
- an input level that produces a certain output distortion, such as 1% THD+N;
- a level that provides good noise performance with comfortable headroom, often called the operating level;
- an input or output level specified in a testing document.
Any of these levels may be used as a reference level on which we can base further measurements. Frequency response measurements, for example, are expressed relative to the level of a mid-band frequency; THD+N measurements are made at specified levels, which should be reported in the results.
The ratio of a DUT’s output voltage level to its input voltage level is the voltage gain of the DUT. For example, in a DUT with a gain of 2, an applied input of 2 volts will produce an output of 4 volts. A gain of 1, where the output voltage equals the input voltage, is called unity gain. Some DUTs offer no gain adjustments, and are said to have fixed gain. The gain may be fixed at unity, or at some other value.
A DUT with a volume control or other setting that affects gain is a variable gain device. When setting and measuring level, it is essential to consider whether or not the DUT gain is variable (not only volume controls, but tone controls and other settings can change gain), and, if it is, how to set the DUT controls for the desired test results.
FREQUENCY RESPONSEA frequency response measurement reports the output levels of a DUT when stimulated with different frequencies of known level. The simplest of all frequency response measurements consists of only two or three tones, the first near the middle of a DUT’s usable frequency range, and followed by a tone near the higher extreme of the range and sometimes a tone near the lower extreme. Assuming the tones are all generated at the same level, the DUT’s output levels describe its response to these different frequencies.
Fig. 2: An example of a frequency response sweep of a device.Full-range frequency response measurements can be made by a number of different methods, the classic being a sweep of a sine wave from the lowest frequency in the range to the highest, with the results plotted on a graph. A “flat” response describes the shape of a graph where the DUT responds equally at all frequencies, producing a trace with a slope of 0 and with minimal variations. Fig. 2 shows a typical result.
THD+NTHD+N stands for Total Harmonic Distortion plus Noise. Harmonic distortion is the unwanted addition of new tones to the audio signal. These tones are harmonically related tones to the original signal: when the signal is one sine wave of frequency f1, harmonic tones are f2, f3 and so on, at integral multiples of the original tone. Total harmonic distortion is the sum of all of the harmonics measured in the DUT’s bandwidth.
Why THD+N? Why not just measure THD (the distortion) and N (the noise) individually? Well, in the pre-FFT days of audio measurement, it was difficult to measure the THD by itself, without the noise, but it was relatively simple to measure the THD and the N together. So the accepted techniques handed down from years past specify THD+N, because that’s what was practical. In addition, THD+N is a convenient and telling single-number mark of performance, widely understood and accepted.
The measured THD+N of a device will vary with the measurement bandwidth. You will almost always want to restrict the measurement bandwidth using high-pass and low-pass filters, and you must include the bandwidth used when you state the result. THD+N is typically measured and reported in a 20 Hz–20 kHz bandwidth.
Fig. 3: Screenshot of a THD+N measurement of a device at maximum operating level.The measured THD+N of a device will also vary with level and the frequency of the applied signal. Audio THD+N is typically measured and reported at a mid-range frequency (1 kHz or so) at either the device’s nominal operating level or at its maximum output level (MOL). Fig. 3 shows a typical THD+N measurement result at MOL.
PHASEIn audio engineering, phase measurements are used to describe the positive or negative time offset in a cycle of a periodic waveform (such as a sine wave), measured from a reference waveform. The reference is usually the same signal at a different point in the system, or a related signal in a different channel in the system. This choice of references defines the two most common phase measurements: device input/output phase, and interchannel phase.
Phase shift varies with frequency, and it is not uncommon to make phase measurements at several frequencies or to plot the phase response of a frequency sweep. Phase is expressed in degrees.
CROSSTALKIn audio systems of more than one channel, it is undesirable for the signal in one channel to appear at a reduced level in the output of another channel. This signal leakage across channels is called crosstalk, and in practical devices it is very difficult to eliminate. It’s expressed as the ratio of the undesired signal in the unstimulated channel to the signal in the stimulated channel.
Crosstalk is largely the result of capacitive coupling between channel conductors in the device, and usually exhibits a rising characteristic with frequency. It’s often expressed in the form of a single-number result; however, a crosstalk versus frequency sweep will show how a DUT performs across its operating bandwidth.
SIGNAL-TO-NOISE RATIOHow much noise is too much? That depends on how loud your signal is. Signal-to-noise ratio (or SNR) is a measure of this difference, providing (like THD+N) a single-number mark of device performance. The signal is usually set to the nominal operating level or to the maximum operating level (MOL) of the DUT. When SNR is made using the MOL, the result can also be called the dynamic range, since it describes the two extremes of level possible in the DUT. (Dynamic range in digital devices has a somewhat different meaning). SNR is usually stated in decibels, often shown as negative. Fig. 4 shows a typical SNR measurement result.
Fig. 4: A typical SNR measurement result.Using traditional methods, SNR requires two measurements and a bit of arithmetic. First you measure the signal level, then turn off the generator (and often, terminate the DUT inputs in a low impedance as well, to fully reduce the noise in the device). Then the noise level (often called the noise floor) is measured, using filters to restrict the measurement bandwidth. The ratio between the two is the SNR.
David Mathew has worked as both a mixing engineer and a technical engineer in the recording and filmmaking industries. He was awarded an Emmy for his sound work in 1988.
The post Introduction to the Six Basic Audio Measurements appeared first on Radio World.
Inside the Feb. 19 Issue of Radio World
Michael LeClair reflects on trends in audio consoles; Fred Jacobs worries about unintended consequences of radio job layoffs; Christian broadcasters convene in Nashville seeking their 2020 vision; and readers react to our ebook “Radio Engineering in Crisis.”
Read it online here.Prefer to do your reading offline? No problem! Simply click on the Issuu link, go to the left corner and choose the download button to get a PDF version.
WORKBENCHInfrared? Don’t Just Point & Shoot
Engineers, here are useful tips to avoid getting false hot spot readings as you inspect your facilities.
BUYER’S GUIDESports Reporting & Remote Gear
One of our jobs at RW is to help bring buyers and sellers together. Read from your colleagues about why they chose to buy particular products from companies like Comrex, Tieline, Henry and AEQ.
ALSO IN THIS ISSUE:- FCC Weighs the Future of FM6 Stations
- Have Layoffs Done Collateral Damage to Radio?
- Radio World Remembers Our Colleague Kwentin Keenan
The post Inside the Feb. 19 Issue of Radio World appeared first on Radio World.
NAB Show and Coronavirus
The National Association of Broadcasters announced it will proceed with the 2020 NAB Show in Las Vegas, but also laid out the steps it is taking in response to concerns about the coronavirus, which it says it is taking “very seriously.”
The show dates are April 18–22 in Las Vegas.
Getty Images/Yaroslav MikheevThe fact that NAB would issue a statement affirming that the show will go on is a measure of the impact COVID-19 has had on major event planners around the world.
“The association is closely monitoring COVID-19, commonly known as coronavirus, and is prepared to devote whatever resources necessary to ensure a safe and productive NAB Show experience,” it said in a statement. “While the NAB stands firm in its commitment to hold the convention as planned, the health and safety of attendees and participants are NAB’s top priority.”
The association explained the steps it is taking.
Its management team created a COVID-19 resource page on the NAB Show website, where updates will be provided.
As of a week ago, as reported by our sister publication TV Technology, NAB had said no exhibitors had pulled out but that NAB was reaching out to companies from China to assess their status.
They said the show is adhering to guidance and recommended safety measures issued by the World Health Organization and the Centers for Disease Control and Prevention, as well as state and local health organizations; and that it is working with the Las Vegas Convention Center, airport authority and area hotels and resorts to coordinate safety procedures.
It said it is following CDC recommendations and protocols for “heightened levels of cleanliness” at event facilities, and making accommodations and encouraging attendees to take “common-sense precautions” and follow CDC guidelines to prevent the spread of illness.
NAB said it will ensure that medical care is readily accessible to address immediate health concerns, and that it is “working with China-based exhibitors and registered attendees to evaluate options for those unable to attend due to travel restrictions.”
It noted that attendance from China, “although growing, represented less than 2 percent of total registered attendees in 2019.”
As of a week ago, as reported by our sister publication TV Technology, NAB had said no exhibitors had pulled out but that organizers were reaching out to companies from China to assess their status.
In the announcement, the organizers said they have experienced “an uptick in exhibit sales, attendee registration and hotel bookings in recent weeks, and conference program speakers are confirmed daily.”
The post NAB Show and Coronavirus appeared first on Radio World.
Barix and Digigram Asia Announce Partnership for APAC
Digigram Asia Pte Ltd and Barix are now working together in the APAC region.
The companies announced their exclusive partnership, which covers several APAC countries.
These include Singapore, Malaysia, Indonesia, Vietnam, Cambodia, Laos, Philippines, Myanmar, and South Korea.
Under the agreement, Digigram Asia will distribute the entire Barix product line, including the new SIP Opus codec.
“Digigram Asia Pte Ltd is taking another step in its expansion strategy by adding Barix to its existing agreements with Auvitran and Streamguys,” explained says Nancy Diaz Curiel, Digigram Asia managing director. “We will be able to provide extended service and additional value to our customers,” she said.
“Digigram’s knowledge of the AoIP market combined with Barix’s cost-effective solutions for radio broadcast, intercom and paging, as well as audio streaming gives Asian customers access to better solutions for their AoIP needs,” added Reto Brader, Barix CEO.
The partnership took effect Feb. 1.
The post Barix and Digigram Asia Announce Partnership for APAC appeared first on Radio World.
Applications
Broadcast Applications
Actions
Pleadings
Broadcast Actions
Report Paints Bleak Diversity Picture in U.S. Broadcast Ownership
The Federal Communications Commission released its most recent report on the ownership of broadcast stations across the U.S. For the first time it also gathered data on the gender, ethnicity and race of those with an attributable interest in noncom educational stations.
The results revealed that women and minorities still hold only a small fraction of majority ownership in U.S. broadcast stations.
[Read: America’s Broadcasters Should Look Like America]
For example, the report revealed that women collectively or individually held a majority interest in 874 commercial broadcast stations, compared to their male colleagues who hold a majority interest in 8,736.
Yet the report also reveals that radio is an industry providing a higher percentage of attributable ownership opportunities for women and minority groups. According to the report, based on information submitted by licensees in response to the FCC 2017 biennial ownership report, women hold a greater percentage of majority voting interest in commercial AM radio (8.9%) when compared to full-power commercial television (5.3%).
The same trends were seen when in tracking ethnic groups across radio. Hispanic and Latino individuals held a held a discernable majority voting interest in 4.2% of all full-power commercial television stations as compared to 6.1% of commercial AM stations.
Radio World will shortly publish second item with more data about radio specifically.
The disparity was similar when comparing the race of commercial station owners. Those who identify as white were reported to hold a majority interest in 10,076 commercial broadcast stations compared with 416 commercial stations owned by those who identify as a racial minority.
Ownership based on racial group was broken down further:
- Black/African Americans owned 239 commercial broadcast stations;
- Asians owned 136 commercial broadcast stations;
- American Indian/Alaska Natives owned 31 commercial broadcast stations;
- Native Hawaiian and other Pacific Islanders owned seven commercial broadcast stations.
The numbers played out similarly when it came to noncommercial broadcast stations.
Women collectively or individually hold a voting interest in 401 noncommercial broadcast stations. While women have a 9% stake in noncommercial FM radio stations (a total of 314 across the country), not one woman was listed as holding a majority in any noncommercial Class A television stations. Compare that to the noncommercial ownership numbers for men, which collectively or individually hold a majority of the voting interests in 2,564 noncommercial broadcast stations, including 2,086 FM radio stations.
Data gathered from the 2017 biannual report gave details on ownership, such as a breakdown of owners of commercial AM radio stations.Racial minorities holding a majority of the voting interest at noncommercial stations includes 109 noncommercial broadcast stations, including 12 AM radio stations and 91 FM radio stations.
Ethnicity was also tracked as part of the report. Those who do not identify as Hispanic or Latino hold voting interests in 9,836 commercial broadcast stations, compared to only 668 Hispanic/Latino owners. For noncommercial stations, the numbers were still stark: Non-Hispanic/Latino persons collectively or individually held a majority interest in 3,100 noncommercial broadcast stations, compared to 121 noncommercial broadcast stations.
“It is striking — but not surprising — that no minority group is better off in owning more full-power commercial broadcast stations than they did in 2015,” said FCC Commissioner Geoffrey Starks in a statement. The year 2015 was the last year that this type of ownership data was collected. Of 1,385 stations, African-Americans owned just 12 stations in 2015 — “an anemic figure to be sure,” he said — and still owned just 12 stations in 2017.
Many minority groups saw their ownership numbers worsen, he said, including American Indian or Alaska Native women. “They lost all eight stations in which they held a majority ownership interest in 2015,” Starks said, which was the last year that the report was produced.
Women lost ground overall, representing only 5.3% of full-power commercial station owners, down from 7.4% in 2015.
“I have said it before: America’s broadcasters must look like America,” said Starks, one of two Democrats currently sitting on the five-member FCC. “We have much work to do — and it starts with us fulfilling our direct order from the Third Circuit to implement a data program that would help understand the impact of our regulatory efforts on the ability of women and people of color to own stations.”
In addition to a breakdown on gender, ethnicity and race, the report includes a comparison of 2017 and 2015 data for full-power commercial television, Class A television, low-power television, commercial AM radio, and commercial FM radio stations; as well as detailed ownership information in a series of tables and spreadsheets.
Reports can be searched via licensee name, call sign, service or FCC Registration Number here.
The post Report Paints Bleak Diversity Picture in U.S. Broadcast Ownership appeared first on Radio World.