Industry News

Edison Research’s second look at South Africa through its Infinite Dial methodology finds online audio use has exploded over the past four years.

In the 2019 Infinite Dial South Africa report, 39% of respondents 15+ in major metro areas reported using online audio. In the 2022 report, that number increased to 61% of respondents.

Weekly radio listening held steady from 2019 to 2022 with 69% of respondents reporting having listened to the radio in the past week, up one percentage point from 68% in 2019. Ninety-four percent of respondents reported having at least one radio in their home, although 64% of respondents said they used a mobile phone, computer or television for in-home radio listening too, which was a significant (44%) increase from 2019.

Comparison of 2019 to 2022 reported radio listening in the past week among those 15+ (Edison Research)

In terms of in-car listening, 80% of respondents 18+ reported having tuned to AM/FM radio while driving or as a passenger within the past month.

Ninety percent of respondents 15+ reported owning a smartphone in 2022, and 32% said they owned a smart speaker. More than a third (36%) of people in 2022 reported having ever downloaded an AM/FM radio station’s smartphone app.

Podcasting also saw substantial gains with 26% of respondents 15+ listening to podcasts at least monthly in 2022 compared to 10% in 2019. Fourth-eight percent of respondents said they were aware of podcasts even if they didn’t listen to them.

Podcast listeners were slightly more likely to be male than female (53% to 47%) and aged 15–34 (51%), compared to 35–54 (38%) or 55+ (11%). Of the 20% of people who reported listening to podcasts weekly, they listened to four episodes on average each week.

Comparison of radio ownership in South Africa and the U.S. (Edison Research)

When it comes to streaming audio services, YouTube Music had the greatest brand awareness with 69% of those 15+ being aware of the service. Spotify followed at 36% and Joox, an Asia-based streamer that launched in South Africa in 2017, at 27%.

The Infinite Dial 2022 South Africa survey was conducted by Edison Research in November/December 2021 with in-person interviews of 1,500 people living in eight major metropolitan municipalities in South Africa: Nelson Mandela Bay, Mangaung, Johannesburg, eThekwini, Cape Town, Buffalo City, Tshwane, and Ekurhuleni. The data was weighted to reflect the gender, age, and race of the population. No margin of error was reported.

The National Association of Broadcasters South Africa commissioned the survey, which was sponsored by Triton Digital, and produced in association with The Broadcast Research Council of South Africa.

Larry Rosin, President of Edison Research, shared findings from the study in an online presentation today. Rosin added, “The increase in online audio consumption and podcast listening among those we surveyed in South Africa points to a space that can accommodate many audio platforms while radio stays strong. We hope this data that shows robust growth in audio consumption motivates advertisers to consider all of these various audiences.”

The post Radio Holds Steady in Infinite Dial 2022 South Africa appeared first on Radio World.

The ability for a radio to toggle between an audio stream and over-the-air broadcast is coming to vehicles manufactured by a big German automaker.

And, the rollout includes the North American marketplace.

Please Login to view this premium content. (Not a member? Join Today!)

In April 2021, RBR+TVBR first reported on the sale of WNUE-FM 98.1 by Entravision Communications — a move that would begin a wind-down of Orlando DMA operations for the multimedia company superserving Hispanic consumers in the U.S.

Now, the individual who most recently served as SVP/GM for Entravision/Orlando — a 2021 Medallas de Cortez finalist — has joined the broadcast television company that will soon be led by Soohyung Kim.

Please Login to view this premium content. (Not a member? Join Today!)

In light of Russia’s attack on the Ukraine, FCC Chair Jessica Rosenworcel has proposed action to help protect America’s communications networks guard against cyberattacks. Earlier in the week, the Department of Homeland Security warned U.S. organizations at all levels that they could face cyber threats stemming from the Russia–Ukraine conflict; the FCC said Rosenworcel’s proposal would begin an inquiry into the vulnerabilities of the internet’s global routing system.

If adopted by a vote of the full commission, the Notice of Inquiry would seek public comment on vulnerabilities threatening the security and integrity of the Border Gateway Protocol (BGP), which the FCC says is central to the internet’s global routing system. The inquiry would also examine the impact these vulnerabilities would have on the transmission of data through email, e-commerce, bank transactions, interconnected voice-over-internet protocol (VoIP), and 911 calls — and how best to address these challenges.

BGP is the routing protocol used to exchange reachability information among independently managed networks on the Internet. BGP’s initial design, which remains widely deployed today, does not include explicit security features to ensure trust in this exchanged information.

As a result, the FCC said, a bad network actor may deliberately falsify BGP reachability information to redirect traffic. Russian network operators have been suspected of exploiting BGP’s vulnerability to hijacking in the past. “BGP hijacks” can expose Americans’ personal information, enable theft, extortion, and state-level espionage, and disrupt otherwise-secure transactions.

Working with its federal partners, the commission has urged the communications sector to defend against cyber threats, while also taking measures to reinforce the nation’s readiness and to strengthen the cybersecurity of vital communications services and infrastructure, especially in light of Russia’s actions inside of Ukraine.

Rosenworcel also recently shared with her colleagues a Notice of Proposed Rulemaking that would begin the process of strengthening the commission’s rules for notifying customers and federal law enforcement of breaches of customer proprietary network information (CPNI). The inquiry under consideration would build on those efforts, the FCC said.

The post FCC Takes Steps to Protect Against Cyberattacks From Russia and its Agents appeared first on Radio World.

She’s served as the Senior Affiliate Sales Director for the Networks Division since September 2019.

Now, this individual, who played a key role in the launch of digital multicast networks Antenna TV and Rewind TV for Nexstar Media Group, is being promoted to VP/GM under Networks Division President Sean Compton.

Please Login to view this premium content. (Not a member? Join Today!)

The 9am Eastern earnings call scheduled for today was cancelled. That’s because TEGNA is going private, with Soohyung Kim’s Standard General and Apollo Global Management teaming up to acquire the television broadcasting company.

That didn’t stop the owner of such stations as WUSA-9 in Washington, D.C., and KGW-8 in Portland, Ore., from issuing what will likely be its final fourth quarter results under CEO Dave Lougee.

How did TEGNA do in the last three months of 2021? Total company revenue came in as expected, and beat the Zacks Consensus Revenue forecast.

Please Login to view this premium content. (Not a member? Join Today!)

VIZIO Ads is expanding its omnichannel offering via a partnership with TransUnion.

This, VIZIO says, will enable its advertising partners to leverage its data from 19 million Smart TV households off-platform, to reach consumers on millions of mobile devices with a “cohesive” experience.

Please Login to view this premium content. (Not a member? Join Today!)

Public speaking is so much about the words we say and how we say them that we seldom think about the pauses. For “Zoom expert” and longtime public relations professional Rosemary Ravinal, “The periodic mini moments of silence or breathing are just as important as speaking. They vary in length and can be powerful allies to build trust and make your verbal communication more human.”

A pause holds many benefits. She explains what they are in this column.

Please Login to view this premium content. (Not a member? Join Today!)

Fig. 1: A simple fixture to lift grounds and swap conductors as you correct for Pin 1 problems.

San Francisco Projects Engineer Bill Ruck and I have been conversing via email about the Pin 1 grounding issue discussed in Workbench in December and January, especially the problem encountered when interfacing gear to an outside source, such as an event sound contractor.

Bill built up a variety of XLR adaptors that he keeps organized in one of those black cotton bags found at Harbor Freight. The first photo shows his male and female XLRs brought out to a barrier strip.

This adaptor makes lifting grounds or switching “HOT” pins on the XLR easier than disassembling and resoldering connector pins. Now Bill can try different configurations with only a screwdriver and see what works best. He can also change from balanced to unbalanced by moving the lugs on the barrier strip.

Fig. 2: The same idea, but bringing the conductors out to alligator clips.

The rig in the second photo can be used in a similar fashion, as it brings the terminals out to alligator clips. Bill made up two other adaptors, seen in the third image. On the left, this jumper has Pins 2 and 3 reversed. The assembly on the right lifts the ground, Pin 1.

You’ll note that Bill took advantage of his labeling machine to identify all the adaptors and to include his name — less of a chance of something “walking off.”

Bill also provided a link to an interesting series of papers about the “Pin 1 problem” should you want further information. The URL, appropriately enough, is www.pin1problem.com.

Gotta run for shade
Alan Peterson, national production director and weekend program coordinator for the Radio America Network in Arlington, Va., and former Radio World columnist, has been following our Pin 1 discussion too. He offered a simple mnemonic to remember the order of XLR connections: “2 is Hot, 3 is Not.”

Fig. 3: Additional adaptors that reverse Pins 2 and 3, and lift the Pin 1 ground.

Likewise, Alan reminded me that Kool & The Gang permanently cemented the standard in 1979 when they rolled out the song, “Too (2) Hot.” Hum that to yourself and you will never forget!

He adds that he wished XLR plug manufacturers would emboss larger numbers on those connectors. Yes, Alan, my eyesight is failing, too.

Alan then surprised me with news that he’ll be retiring in March from Radio America. Congratulations!

Man Cave
I’ve gotten a number of great comments about our description of Harry Simons’ living room studio, which he built in retirement. More than one engineer wanted to know what Harry’s wife had to say about turning the living room into a studio. No problem there, Harry’s single!

Slippery when cold
When it snows and sleets down in the Carolinas and Georgia like it did recently, you know it’s winter. And that means keeping something handy to keep your locks working.

We’ve written about the many great applications of WD-40 Multi-Use Product. Educational Media Foundation Field Tech Scott Todd writes that when it comes to spray lubricants, especially for locks, you may also want to try a couple of other options, both available from Amazon.

The reviews for PB B’laster Penetrant note that it stinks. Also, that it’s a great penetrating oil but not a silicon lubricant. PB B’laster Silicon Lubricant, on the other hand, contains a higher concentration of silicone than other brands, which means longer-lasting lubrication. It’s formulated with a Teflon polymer. This compound is a clear, non-evaporating formula that can lubricate and protect not only metal, but also plastic, wood, rubber, vinyl and leather products.

[Check Out More of Workbench Here]

Scott says that in his opinion, the gold standard in lock lubricants, bar none, is Kano Laboratories’ Penephite Graphited Penetrating Oil. On Amazon, this spray has a 78% five-star review. It consists of a combination of oils, solvents and micron-sized graphite in a suspension. The oils and solvents carry the graphite into infinitely small spaces to loosen frozen parts. Once deposited, the graphite provides long-lasting lubrication.

Strong not silent
Back in September 2019, we published a Workbench tip from EMF’s Ken Beckwith about constructing an EAS Loop antenna out of PVC. Carroll Broadcasting’s Lance Coon wrote in recently to say he was looking to build this antenna for his stations but needed clarification on one point.

In the article, we mentioned improving the “strength” of the loop by adding a piece of conduit down its middle.

Lance wanted to confirm that be “strength,” we meant the rigidity of the loop, not the strength of the signal.

Lance, you are right. To increase the signal strength or sensitivity, you’d add more turns of wire to the loop. Mounting shouldn’t be critical; just be sure the edge of the loop is pointing toward the EAS signal you want to receive. Be sure to send us a picture of your completed project, Lance!

John Bisset, CPBE, has 50 years in broadcasting and is in his 32nd year writing Workbench. He handles western U.S. radio sales for the Telos Alliance and is a past recipient of the SBE’s Educator of the Year Award.

Workbench submissions are encouraged and qualify for SBE recertification credit. Email johnpbisset@gmail.com.

The post Workbench: Adaptors Help Solve Pin 1 Problems appeared first on Radio World.

Retired broadcast engineer John Warner died Friday at age 73.

The cause of death was not announced. His daughter told Radio World that it was not related to COVID.

Warner was known widely as an expert in AM radio engineering. In 2010, when he was vice president of engineering for Clear Channel Communications, Radio World wrote: “When it comes to AM radio stations in the United States, perhaps no engineer has quite the number of sites to worry about as does John Warner.” Clear Channel’s AM properties typically numbered 250 to 300 at that time.

He later held the title of vice president of AM transmission for the company, which had been renamed iHeartMedia.

Jeff Littlejohn, executive vice president, engineering and systems for iHeartMedia Technology Operations, said this weekend, “He was truly respected for his knowledge of AM, not only from the iHeart engineering staff, but also from the consulting engineering community at large. I never saw a problem that John could not beat. John loved to teach others about his craft, so any engineer that was eager to learn would have John as a willing teacher.”

Early start

Warner became interested in radio as early as age 8 or 9, he told Radio World’s Michael LeClair in 2010.

“I owned a crystal set when I was young. My father was interested in radios, and I built a small radio as a scouting project. My mother actually taught me to solder. During World War II, she worked at Bendix Radio in Baltimore, which manufactured aircraft and tank radios for the war.”

Warner lived on a farm as a child and became interested in antennas so that he could pick up different kinds of radio signals.

“I used to listen to all the European broadcasters via shortwave, and I experimented with long-wire and curtain array antennas. My father encouraged my interest in radio, and for one of my birthdays he gave me a telephone pole, which he then helped me to put in the ground to use as a tower that I could use to make experiments.”

He attended the University of Maryland for two years in 1966 and 1967 and studied defense electronics and electrical engineering. He did not obtain a formal degree because his family did not have enough money to let him complete college, but he later went back to school and took further engineering courses at Johns Hopkins.

His first job in radio was at station WBAL in Baltimore in 1979, a a 50 kW clear-channel AM station on 1090 kHz with a high-power directional array.
Warner credited veteran engineer Harrison Brooks, who had just retired at that time, with teaching him a lot of the history of WBAL and about broadcasting in the Baltimore area.

He also credited Ron Rackley, whom he met in 1986, with influencing his career. “We were installing a new Continental 317C at WBAL, and to improve the stability of the array, we also replaced the sample system at the same time and did a full proof. Ron and I struck up an immediate friendship while working on that project and we’ve stayed in touch ever since.”

John Warner with tower-based matching and filtering equipment for a five-tower triplexed DA in Boston designed by Ron Rackley. Courtesy Tom King

Rackley gave Warner his first copy of the MiniNEC code, used to model the behavior of antennas. “In those days it ran on an 8086 class computer, and it would take hours to do a tower model. I remember that you could start a model in the morning and let the computer run all day while working, and come back to find that it had just finished around 5 p.m.,” he told Radio World in that 2020 article.

Warner came to Clear Channel when Jacor was acquired in 1999. Among his duties, he was responsible for overseeing the design and construction of new AM facilities and the maintenance and refurbishing of existing AM stations.

During his career, among other activities, Warner spoke at the NAB Show’s AM Boot Camp and was a member of the Association of Federal Communications Consulting Engineers.

“He thoroughly enjoyed his work and it gave him great purpose in life,” daughter Jenn told RW Sunday. “He loved imparting his wisdom and experience with others and formed friendships with others in the business through collaboration.”

He also enjoyed traveling, photography, gardening, amateur radio and spending time with his grandchildren.

According to his obituary, his wife Lynne Hartwell Warner passed away in 2013.

Funeral services and interment are private.

[Read Radio World’s 2010 profile of John Warner.]

The post John Warner Dies, Was Respected AM Engineer appeared first on Radio World.